CG2 NanoCoatingsspacerHomeNanocoating TechnologyProductsPeopleNewsContactspacer Products

Anti-Stain Coatings

Our team has considerable experience with anti-stain technology. The technology uses easily available and economical ceramic nanoparticles. These nanoparticles are essentially nano-chemical reactors that can be functionalized in various ways to meet specific requirements. The linked overview provides more information on the technology and its benefits. The following movies demonstrate the capabilities of our technology.

Compared to an Untreated Masonry Substrate

This movie demonstrates the capability of our coating as compared to an untreated masonry surface, against a variety of staining agents.

Can't detect flash player. Download the mpeg video (9.8 mb).

Compared to a Standard Flat Latex Paint

The next two movies demonstrate the capability of our coating as compared to a surface painted with a commercially available flat latex paint, against a variety of staining agents. The following process was used to prepare and conduct the test:

  • Two coats of a standard primer followed by two coats of the latex paint, applied by roller;
  • One coat of our coating, also applied by roller;
  • Seven days drying time;
  • Application of the following contaminants: crayon, lipstick, pencil, grease scum and mustard; and
  • Three hours of drying time before the contaminants were cleaned.

This movie shows the removal of the contaminants:

Can't detect flash player. Download the mpeg video (15.2 mb).

This movie shows key test preparation steps:

Can't detect flash player. Download the mpeg video (24.0 mb).